英汉词典

1.To create a smooth transition select edges along connection of the wall and the floor and apply Chamfer.

如果你要创建平滑的过渡，你可以沿着墙和地面交界的边，然后进行倒角。

2.Marking chamfer and taper is a routine work in Mechanical drawing.

在机械制图中，通常需要进行大量的倒角和锥度的标注工作。

3.The method of chamfer equalizer-slot in the spool, which used to decrease the tightening force, was wildly used in the practical application.

在阀芯上开均压槽用来减少卡紧力的方法已经在实际中得到了广泛的应用。

4.After the part is complete chamfer all corners and relieve all burs.

部分完成后，倒角的各个角落，减轻所有钻。

5.In assembly drawings, certain technical structures, such as round, chamfer, and undercut can be omitted.

对零件的工艺结构，如小圆角、倒角、退刀槽等可省略不画。

6.In addition, tools like floor generator and quad chamfer are really helpful and further speed up the modeling process.

此外，像地板生成器和切角工具十分有用，也进一步加快了建模过程。

7.Table 1 – Accepted deiation for linear measurement except for chamfer edges.

表1---除倒角外，所有线性尺寸的公差标准。

8.The Chamfering machine is a kind of special machine that mainly used to chamfer the end of pipe & tube.

倒棱机是一种专用机床，主要用于对钢管端部进行平头及倒棱加工处理。